Run RDWorks on a Mac. By Dave Vigness » Fri Apr 10, 2020 4:23 am 7 Replies 1642 Views Last post by Tim Mellor Thu Apr 16, 2020 5:09 am 79 topics. Jun 23, 2017 RDworks vs LaserCut. Download and install RdWorks v8. All features of RDworks / RDCAM for laser machine. Download the latest Rdwork for your laser cutter machine or laser engraver by Thunder Laser. Laser Works free download - TMPGEnc Authoring Works, TMPGEnc Video Mastering Works, Canon LASER SHOT LBP-1120, and many more programs.

2Design software
- 2.2Illustrator
- 2.5Autodesk Inventor
4Materials

Usage

Step 0 - Turn on the laser cutter if you plan to use it, as it takes 5 minutes to warm up. Turn it on using the red and green buttons simultaneously on the right hand side.

Prepare your file to cut or engrave. You'll need a .dxf file with all the paths stroked at 0.25px, with each different color of the paths representing different cut/engrave parameters. You can find such files by searching on Thingiverse and other related sites, or creating your own with software such as Inkscape, Illustrator, Inventor, or many others. Unfortunately many of the files you find online are in .ai, .pdf or .svg, you'll need to open them in one of these apps and export them to .dxf.
Open the file in Laserworks. On the machine next to the laser cutter, plug in your USB key, and then import the .dxf via File > Import (ctr + i). If Laserworks says that it did not find any data, it means that you did not format your file correctly, or you used an incompatible file type. If you used illustrator, it may be due to having sublayers, which laserworks doesn't see.
Scale and arrange your paths. Once you have imported your .dxf, the paths in the file will be shown in Laserworks. You can either select all of the paths, or select just one of them, and scale using the black arrows on the sides, or by changing the values in the scale toolbar on the top. It is also possible to move your paths by clicking and dragging the pink cross in the middle. You can group your paths using the group button on the top toolbar.
Add or edit paths. You can do some basics edits in Laserworks with the toolbar on the left. If you want to cut/engrave your paths with different settings, you can set each paths' parameters by choosing a colour on the bottom toolbar. For example: you want to engrave a design, and cut a circle around it - so you set the design to red, and the circle to black.
Select your engrave/cut parameters. On the top of the toolbar on the right, you'll see that each colour has its own parameters, and you can edit each one by double-clicking on it.
1. Output Set to yes in order for your paths to cut/engrave (setting it to no could be useful if you have construction/instructional paths or you have multiple designs in the same file).
2. Speed. See Materials section below to select the correct speed for cutting.
3. Blowing. Set to yes, this is the internal air compressor that blows out of the mirror head.
4. Processing mode. Set this first as all the following settings will depend on it. Cut will cut along the paths as a vector, scan will engrave between the lines of your paths, and dot will make a dotted outline of your paths.
5. Power. See Materials section below to select the correct power.
6. Ramp Effect. The exact use for this feature is unknown, however it is suspected that this can be used for stamps. Leave disabled.
7. Overstriking. Sets how bold your scan will be - if left at Un-process, your scan (engraving) will be normal, if set to Intagilo, your scan will be bolder (wider/thicker edges), and if set to Rilievi, it will be lighter. It is best to leave it Un-processed.
8. Scan mode. Only in scanning/engraving mode. Unilaterism mode will scan/engrave one line at each time the laser head passes, and swing mode will scan/engrave two lines at each pass, going in both directions. Uni mode gives better results but takes twice as long as swing mode. Set x if the paths are wider on the x scale than on the y scale, and choose y for when the paths are longer on the y scale - this optimises laser time.
9. Interval. Only in scanning/engraving mode. Set the distance between each laser pass. 0.1mm is the minimum distance, and will produce results similar to a printer - but it takes a lot of time. 0.2mm is a good average, you can't really see the space between the passes. You can go up to 0.4mm before it starts to be somewhat visible.
10. Interval > Advance. The cut after sweeping option allows you to make a contour along the edges of what you engraved. This can be useful for making letters clearer for example, however it can also make your job messier (especially if there are lots of small details). You can set the settings for this just like you would for a normal cut, however you can lower the power down to as little as 5.7% for a very light outline.
Place your material into the laser cutter. See Materials below for a list of materials that you can use. It is recommended that you align your material as close to the upper left corner as possible, as that is where the laser is strongest.
Make sure that the material is flat. Your cut/engrave will be of a lower quality if there is up to 0.5mm height difference, and your material may damage the laser machine if there is a 0.8mm or more height difference! Use yellow painting tape to stick it to the edges, or pick a different piece of your material if there is too much height difference.
Align the mirror head. Laserworks cuts from the green square, so make sure that you align the mirror head to the top right side of your design on the material you're cutting, with the four blue arrow buttons on the laser machine. Measure out the total distance of your design (in laserworks, ctrl + a, then see the width and height in mm), and make sure that it doesn't go outside of your material and especially not outside of the cutting bed! You can use the 'Go scale' button to show you the outer dimensions of your cut without cutting on the laser machine.
Align the height. There is an auto-focus feature on the laser, however unfortunately it is not currently functional due to a broken piece. Please see someone who knows how to use the laser to find out how to align the height correctly.
Make a final check of everything. Make sure that there are no obstructions inside the laser machine, make sure that you've set all the correct cutting speeds and powers, and make sure that your cut/scan does not go outside of the borders of the cutting bed. If you want a preview of what the laser will do, select everything in Laserworks, and click the preview button on the top toolbar.
Turn on the ventilation and close lid. Turn on the extraction fan by turning on the black powerstrip under the laser machine. Close the lid and put on your safety glasses.
Start your cut/engrave!. After making sure that everything is good (and that you have the proper authorizations to use the laser machine), select everything you want to cut (ctrl + a), and press the 'Start' button in LaserWorks!
Monitor the machine. Whilst the machine is working, you have to be nearby watching what it's doing!! If the material that you're cutting starts burning, immediately stop the cut, move the mirror head out of the way, and extinguish the fire with the fire blanket nearby (water will damage the machine). The renens fablab had their laser machine partially destroyed because someone went out to smoke whilst letting the laser cutter working - so pay attention!.
After the machine has finished. When the job is finished, you will hear the laser beep three times, and you'll see the time on the small laser machine screen stop going up. Wait 30 seconds for the fumes to get extracted, and then proceed to open the lid. Make sure to remove all of the material from the machine - put the larger scraps on the shelves next to the machine for others to use, and throw away the smaller ones into the correct recycling bin. Remove any tape that remains, and move the mirror head to the top right side of the machine. Turn if off after leaving it to cool down for a few minutes (unless you're going to use it later in the day - it is best to leave it on in that case).
Finish your pieces. Clean your completed pieces with compressed air (will get rid of all the carbon and dust accumulated), remove and protective tape, and optionally clean it with alcohol to remove any sediment (works great on both acrylic and wood).
Leave

Laserworks For Mac